Phone number conversion codes
If you store phone numbers in your contacts using “+” and the country code, store the following
codes in the base unit so that phone numbers will be dialled correctly.
1
Tap
[Landline]
in the home screen or app list.
2
Tap
[Landline settings]
®
[Initial settings]
.
R
The handset connects to the base unit.
3
Tap
[Phone number conversion]
.
4
Select a code to edit, enter the code (4 digits max.) and then tap
[OK]
.
–
[International code]
: This is the international dialling prefix that you need to dial when
dialling international phone numbers manually.
–
[Country code]
: This is the country code required when calling your country from
overseas.
–
[National access code]
: If you store domestic phone numbers in your handset using “+”
and the country code, this is the number that should replace the country code when
calling domestically.
First ring
This setting determines whether the first ring is heard when a landline call is received. If your
landline has Caller ID service and you do not want your phone system to ring before caller
information is received, select
[Off].
Note that you can only remove the first ring if the phone
system rings 2 times or more by default, which depends on your landline phone service.
1
Tap
[Landline]
in the home screen or app list.
2
Tap
[Landline settings]
®
[Initial settings]
.
R
The handset connects to the base unit.
3
Tap
[First ring]
.
4
Select the desired setting.
Recall/flash time
1
Tap
[Landline]
in the home screen or app list.
2
Tap
[Landline settings]
®
[Initial settings]
.
R
The handset connects to the base unit.
3
Tap
[Set recall time]
.
4
Select the desired setting.
44
Other Features and Settings
