background image

Accessory order information

*Replacement parts and accessories are available through your local

authorized parts distributor.

Part 

No. 

Picture Description Comment

 

 

KX-J25W.B 

Handset cord

25 

Important information

*Keep the unit away from heating

appliances and electrical noise
generating devices such as
fluorescent lamps and motors.

 unit should be kept free of

dust, moisture and vibration, and
should not be exposed to direct
sunlight.

 not use benzine, thinner, or

the like, or any abrasive powder
to clean the cabinet. Wipe it with

a soft cloth.

 not use any handset other

than Panasonic handset.

If there is any trouble, disconnect
the unit from the extension line

and connect a known working
phone. If the known working
phone operates properly, have it
repaired by one of the specified
Panasonic Factory Service

Centers. If the known working
phone does not operate properly,
check the Electronic Modular
Switching System and the internal

 wiring.

information

Important

WARNING:

 PREVENT 

 OR

NOTE:

 equipment has been

tested and found to comply

with the limits for a Class 
digital device. pursuant to Part

15 of the FCC Rules. These
limits are designed to provide
reasonable 

 against

harmful Interference In a

 installation. This

equipment generates. uses.
and can radiate radio
frequency energy and, if not

installed and used in
accordance with the

 may cause

harmful interference to radio

 However,

there is no guarantee that

interference will not occur   a
particular installation. If this

equipment does cause harmful

Interference to radio or

television reception, which can

be determined by turning the
equipment off and on, the user

is encouraged to try to correct

the interference by one or

more of the following
measures:

 HAZARD, DO NOT

EXPOSE THIS PRODUCT TO

RAIN OR ANY TYPE OF
MOISTURE

CAUTION:

To assure continued

compliance with FCC rules, do

not make any unauthorized

 When

programming emergency
numbers and/or making test

calls to emergency numbers:

 Remain on the line and

2

briefly explain to the

dispatcher the reason for
the call before hanging up.

Perform such activities in

the off-peak hours, such as

early morning hours or late
evenings.

This telephone provides
magnetic coupling to

  a i d s

INSTALLATION:

1) 

Never install telephone
wiring during a 

storm.

2) Never install telephone jacks

in wet locations unless the

jack 

IS 

specifically 

for wet 

3) Never touch uninsulated

telephone wires or terminals

 the telephone line

has been disconnected at

the network Interface.

4) Use caution when installing

or modifying telephone

(cont.)

-Reorient or relocate the

 antenna.

-Increase the 

between 

 and

receiver,

-Connect the equipment into

an outlet on a 
different from that to which

the receiver is connected.

-Consult the dealer or an

experienced 

technician for

help.

Summary of Contents for KX-T7050







Reviews: