14
4
3
2
1
The tilt angle of the operation board can be
adjusted to one of four angles.
To lift:
Lift up the operation board to the desired
step-angle (1 2 3 4).
To set down:
Lift up the operation board to the
highest angle and then press down to
step-angle 1.
Be careful not to get your
fingers caught between the base and
the operation board.
Pull down the handset hook until it locks to prevent the
handset from slipping down from the operation board when at
step-angle 4.
Tilt Angle Adjustment
Wall Mounting
1
Set the operation board to
step-angle 1.
3
Mount the unit on the wall.
*
Model shown is KX-T7636.
2
Connect the telephone line cord, and
then attach first and then of the
wall mounting adaptor.
4
Pull down the handset hook until it locks,
so the tab holds the handset.
To temporarily place the handset down
during a conversation,
hook it over the
top edge of the phone as shown.
T7625.book Page 14 Wednesday, January 28, 2004 5:42 PM
