Confirming the Mode
Adjusting the RINGER Volume
Adjust the
RINGER volume
selector lever (at the bottom of the unit) to
the desired setting. ( – LOW, – MIDDLE, – HIGH)
[Default: MIDDLE]
You can confirm the current mode by the position of the
Mode switch
lever (at the bottom of the unit). [Default: NORMAL]
PAUSE:
Used to insert a pause when
storing a telephone number.
AUTO:
Used for Personal Speed dialling.
PROGRAM:
Used to enter the
programming mode.
MESSAGE:
Used to call back the party who left the message
waiting indication.
Handset Volume Control Buttons:
Used to adjust the handset volume.
One-touch Buttons (M1-M5):
Used to
access a feature or as a One-touch
dialling button.
FLASH/RECALL:
Used to send a flash signal in order to access a
PBX feature (eg., Hold, Transfer, or Three-party Conference).
REDIAL:
Used to redial the last dialled number.
8
7
6
5
4
3
2
1
PBX mode
NORMAL mode
Connecting a Communication Device
Telephone Card:
Has two sides (NORMAL mode, PBX mode).
DATA PORT
To connect a communication device such as a computer modem
to the telephone line, please use the
DATA PORT
(at the right
side of the unit). RJ11 modular jack is available.
PBX Mode
NORMAL Mode
Message/Ringer Lamp:
Flashes when you receive a call or when
someone has left you a message.
One-touch Buttons
(1-8):
Used as a One-
touch button which is
set by the Panasonic
KX series Business
Telephone Systems; you
do not need to program
at your extension.
The KX-T7710 has two modes, NORMAL Mode and Panasonic PBX Mode*.
Please use the corresponding side of the Telephone Card depending on the mode.
*The PBX Mode may not be available depending on the model of the connected Panasonic KX series
Business Telephone Systems.
For more detail, please consult your dealer.
Location of Controls
– 6 –