3-28
Telephone Features
C
3.2
Telephone Features
Confirming and calling back
Display Operation (— for the KX-TA30830)
When the Caller ID Indication — Personal button indicator is red,
there are new calls logged in the personal area. When the Caller ID
Indication — Common button indicator is red, there are new calls
logged in the common area.
1. Confirm the number of logged calls.
2. Press the Caller ID Indication button to see the incoming call
information.
• The new information that you have not confirmed will be
displayed first.
3. You can confirm another caller’s information by pressing the
Caller ID Indication button again, or pressing UP or DOWN
on the navigator key.
After displaying all of the new information, the old information
you have already confirmed will be displayed.
• To modify the telephone number, use the HOLD button to
erase and “0 to 9,
and PAUSE” to add numbers from the
first digit.
• To clear the displayed information, press the TRANSFER
button.
• To clear all logged call information in the personal area, go
off-hook and press 70
#. As for the common area, only the
operator or manager can clear all logged call information.
(Refer to “Call Log, Incoming in the Common Area
— CLEAR ALL” in section 3.3.)
The display shows as follows.
• To return to the initial display, go off-hook and on-hook.
The display also returns to the initial display automatically if
no operation is done for twenty seconds.
• Pressing the Caller ID Selection — Personal button or #
provides you with further information about the party stored
in the personal area. Pressing the Caller ID Selection —
Common button or # provides you with further information
about the party stored in the common area.
The display changes as follows.
CID Log Clear
001:0111111111
002:0924773333
(Continued)
Summary of Contents for KX-TA308
Page 12: ...12...
Page 54: ...2 26 Station Programming Personal Programming...
