background image

Telephone Features

3-67

3.2

Telephone Features

E

Conditions

• This feature does not work when “Data Line Security” or “Executive Busy Override

Deny” is set at either or both of the other parties.

• When a two-party call is changed to a three-party call or vice versa, a confirmation

tone is sent to all parties. The tone can be disabled.

Programming References

• System Programming — Installation Manual

[105] Conference Tone
[608] Executive Busy Override

Feature References

Conference
Data Line Security
Executive Busy Override Deny

Executive Busy Override — Extension

Allows you to connect to an existing intercom (extension) call. System Programming is
required to use this feature.

Any Telephone

Dial 2.

Confirmation tone (optional)

If you make an intercom call and while hearing a busy tone

A three-party conference 

is now established.

2

To leave the conference

Any Telephone

The other two parties 

continue their conversation.

Hang up or press SP-PHONE.

To terminate one party and talk to the other

PT

Press the CO or INTERCOM 

of the party to remain connected.

CO

INTERCOM

or

• If all three parties are extensions, this operation is not available.

Summary of Contents for KX-TA30820B







































































































































































































Reviews: