2.1
Telephone Features
2-4
Operations
PT
Dial 2.
Enter the system
password (4 digits).
2
password
Press
AUTO DIAL/
STORE.
AUTO DIAL
STORE
To clear: Press TRANSFER (CLEAR)
and AUTO DIAL/STORE (STORE).
TRANSFER
To clear
Press HOLD (END)
to end programming.
HOLD
AUTO DIAL
STORE
Enter the desired outside
(CO) line number (1-6).
outside (CO)
line no.
Dial .
To go to the next outside (CO) line number: Press SP-PHONE (NEXT).
To go to the previous outside (CO) line number: Press REDIAL (PREV).
To go to another outside (CO) line number: Press AUTO ANSWER/MUTE (SELECT).
To go to another setting: Press AUTO ANSWER/MUTE (SELECT) twice.
REDIAL
To go to the next outside (CO) line number
To go to another outside (CO) line number
SP-PHONE
To go to the previous outside (CO) line number
AUTO ANSWER
MUTE
To go to another setting
AUTO ANSWER
MUTE
AUTO ANSWER
MUTE
Outside (CO) line charge indication
Provides you with a display of each outside (CO) line charge (telephone rate). You can
confirm and clear the displayed parameter and charge.
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM” or
press the PROGRAM button on a KX-T7300 series telephone.
• After programming, return the MEMORY switch to the “SET” position or press the
PROGRAM button on a KX-T7300 series telephone.
!
!
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM” or
press the PROGRAM button on a KX-T7300 series telephone.
• After programming, return the MEMORY switch to the “SET” position or press the
PROGRAM button on a KX-T7300 series telephone.
• The charge and date can be displayed alternately by pressing FWD/DND or MESSAGE
(
→
) button.
!
!
• You may enter the pre-assigned
extension password (4 digits) of
extension jack 01 instead of the
system password.
• To enter outside (CO) line number 01, you
can also press SP-PHONE (NEXT) button.
• To confirm the cleared date and time, press the
FWD/DND or MESSAGE (
→
) button. To return to
the previous display, press the same button again.
Summary of Contents for KX-TA30889
Page 3: ...Section 1 Installation ...
Page 15: ...Section 2 Operations ...
