9.1 System [1]
Programming Manual
131
Default
10 s
Value Range
Immediate, 5 x n (n=1–10) s
Immediate: The call timer starts immediately after an outside (CO) line is seized.
5 x n (n=1–10) s: The call timer starts after the end of dialing.
Programming Manual References
[204] Call Duration Counter Start
Feature Manual References
1.1.43 Display Information
1.1.112 Station Message Detail Recording (SMDR)
Call Duration—CO-to-CO Duration Limit
Selects the maximum length of time allowed for a conversation between 2 outside parties using the Call
Forwarding (FWD) to Outside (CO) Line, Call Transfer to Outside (CO) Line, Unattended Conference, or
DISA feature.
Default
10 min
Value Range
1–32 min
Programming Manual References
[205] CO-to-CO Line Call Duration
Feature Manual References
1.1.91 Outside-to-Outside (CO-to-CO) Line Call Duration
CO Dialing—Dialing Start Time
Selects the minimum length of time that the PBX waits after seizing an outside (CO) line before dialing.
Default
0 ms
Value Range
0 ms, 250 ms, 500 ms, 750 ms, 1000 ms, 1250 ms, 1500 ms
Programming Manual References
[206] Dialing Start Time
Feature Manual References
1.1.71 Line Access, Outside (CO) Line—SUMMARY
Summary of Contents for KX-TA82483 - Expansion Cards
