9.6 DISA [6]
202
Programming Manual
Default
All codes: — (Not stored)
Value Range
4–10 digits (consisting of 0–9)
Programming Manual References
[512] DISA Security Code
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
Security—DISA Security Code Length
Selects the number of digits for the DISA security codes. When this setting is changed, DISA security codes
that have already been assigned will be cleared.
Default
4 digits
Value Range
4–10 digits
Programming Manual References
[530] DISA Security Code Digits
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
Security—DISA Tone after Security Code
Enables the PBX to send a short beep to the caller when the entered number is the same as one of the
DISA security codes.
Default
On
Value Range
On (checked), Off (unchecked)
Programming Manual References
[518] DISA Tone after Security Code
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
Summary of Contents for KX-TA82483 - Expansion Cards
