2.1 Introduction
PC Programming Manual
19
a.
Enter the system password for the PBX.
b.
Click
Setup
.
c.
Specify the settings as required. For more details, see the tables below.
d.
Click
OK
.
3.
Click
OK
.
Maintenance Console will start, and automatically connect to the PBX. If this is the first time that
Maintenance Console has connected to the PBX, and the date and time of the PBX have not yet
been set, the Quick Setup wizard will run. For more details, see
Starting the KX-TAW848
Maintenance Console and Assigning the Basic Items (Quick Setup)
.
Connection Settings for RS-232C
Setting
Values
Explanation
Port
COMx
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Baud Rate (bps)
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Specify the speed of data transmission.
Connection Settings for Modem
Setting
Values
Explanation
Dial Number
1-9, 0, *, #, "," [comma],
T, P, W
Enter the telephone number to be dialed to
access the PBX.
T: Converts the
Dial Type
from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Dial Type
Auto(Tone),
Auto(Pulse), Manual
Specify the outgoing dialing method.
If
Manual
is chosen, dialing must be done with
a connected telephone.
Comment
–
Enter a comment to identify the set of values.
Port
COMx
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Baud Rate
1200bps, 2400bps,
4800bps, 9600bps,
19200bps, 38400bps
Specify the speed of data transmission.
Modem Initialize
–
Enter the modem initialize command, and click
Initialize
to send the command to the modem.
For more details, refer to your modem's
instruction manual.
