2.11 [5] Optional Device
386
PC Programming Manual
Value Range
Disable, Enable
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM
Programming Manual References
2.10.7 [4-1-6] Wired Extension—Simplified Voice Message
2.10.12 [4-2-4] Portable Station—Simplified Voice Message
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
SVM Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call
when an extension user records a greeting message or callers leave voice messages in a message
box.
To change
SVM Cyclic Tone Detection
, follow the steps below:
1.
Change
SVM Cyclic Tone Detection
.
2.
Set the status of the SVM2 card to "
OUS
", then "
INS
".
Default
Fixed
Value Range
Fixed: The number of times of a tone pattern (a set of tone-on and tone-off) that the PBX receives is
fixed to 4 times in the ranges of:
, = 100–1300 ms, =
90 ms, =
90 ms
Option: The tone pattern that the PBX receives is optional as specified in
SVM Cyclic Tone Option
on this screen.
Maintenance Console Location
2.11.5 [5-3-3] Voice Message—SVM
Programming Manual References
None
Feature Manual References
1.16.5 SVM (Simplified Voice Message)
A
B
C
D
C
C
D
D
A
B
C
A
D
B