2.12 [6] Feature
402
PC Programming Manual
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.12.6 [6-6] Tenant
Programming Manual References
2.8.3 [2-2] Operator & BGM
Feature Manual References
1.12.3 Operator Features
1.17.2 Tenant Service
ARS Mode
Specifies the ARS mode used when making a CO line call.
Default
Same as System Setting
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle
Line Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO
Line Access method.
Same as System Setting: The setting specified in
ARS Mode
in
2.14.1 [8-1] System Settings
is
applied.
Maintenance Console Location
2.12.6 [6-6] Tenant
Programming Manual References
2.14.1 [8-1] System Settings
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.17.2 Tenant Service
System Speed Dial
Indicates the system speed dialing table used by the tenant (reference only).
Default
Basic Memory
