2.14 [8] ARS
PC Programming Manual
419
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
TRG 01–TRG 64
Selects the trunk groups that connect to the carrier.
TRG 01–TRG 64
Enables each trunk group for each carrier. If a cell is highlighted in blue, that trunk group is enabled
for use with that carrier.
Default
Trunk groups 01–04: ON
All other trunk groups: OFF
Value Range
OFF (white), ON (blue)
Maintenance Console Location
2.14.6 [8-5] Carrier
Programming Manual References
None
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
Authorization Code for Tenant
Specifies an Authorization code for each tenant. The Authorization codes can be added to the user-
dialed number by specifying "A" command in
Modify Command
on the
Carrier
tab.
Authorization Code for Tenant—Tenant 1–Tenant 8
Specifies the Authorization code of each carrier for each tenant.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.14.6 [8-5] Carrier
