2.5 Utility
PC Programming Manual
49
•
To display information on a single card, select the slot number and name of that card.
•
To display information on all matching cards, select "ALL".
3.
From the
Interval Timer
drop-down list, select the number of seconds between each automatic
screen refresh.
4.
Click
Start
to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click
Refresh
.
5.
Click
Stop
to end monitoring.
2.5.10 Utility—PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available at Installer level.
The displayed items are as follows:
To view PS information
1.
From the
Utility
menu, select
PS Information
.
2.
Click
Refresh
.
2.5.11 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD
memory card, and resets the connected PBX.
This option is only available at Installer level.
2 copies of each of the main system files can be stored on the SD memory card. The names of these
files are as follows:
Item
Description
PS No.
PS location number.
Only registered PSs will be displayed.
Extension Number
Extension number of the PS.
Location—Slot
Slot number of the CS that the PS is registered with.
Location—Port
Port number of the CS that the PS is registered with.
File Name
Description
DSSYS
Main system data file. Contains all of the current configuration data
for the PBX.
DSSYS_S
Backup main system data file
PSMPR
PBX program file. Contains the software to run the MPR board of
the PBX.
