2.7 [1] Configuration
70
PC Programming Manual
Feature Manual References
None
Extension Number
Specifies the extension number of the port.
To change the extension number of a wired extension, follow the steps below:
1.
Type the new extension number, then click
Apply
.
2.
Set the status of the extension port to "
OUS
", then "
INS
".
When changing the extension number, make sure that the extension port is not in use. If the extension
number is changed while the port is in use, the new extension number will not come into effect.
Note that extensions that will have a mailbox using a VM in DPT integration must have extension
numbers of 2–4 digits.
Default
Starting at 101
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
None
Extension Name
Specifies the extension name of the port.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
