2.7 [1] Configuration
PC Programming Manual
71
DPT Type—Type (for Hybrid port)
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.
Set the status of the extension port to "
OUS
".
2.
Change the port type of the extension port, then click
Apply
.
3.
Set the status of the extension port to "
INS
".
When changing the port type of an extension port for which
Wireless XDP
has been set on the
2.10.1 [4-1-1] Wired Extension—Extension Settings
screen, the
Wireless XDP
setting must
be deleted first.
Default
Normal
Value Range
Normal: For connecting a PT
DSS: For connecting a DSS Console (A maximum of 4 DSS Consoles can be connected to the PBX.)
VM (DPT): For connecting a Panasonic VPS through DPT Integration
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
2.7.5 [1-1] Slot—Extension Port—Port Command
Feature Manual References
1.19.3 Voice Mail (VM) Group
DPT Type—Location No. (for Hybrid port)
Specifies the location number of the connected DSS Console.
Default
1
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
