2.7 [1] Configuration
PC Programming Manual
77
Default
112 ms
Value Range
64 + 16 × n (n=0–11) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Pulse / DTMF Dial—Pulse Inter-digit Pause
Specifies the length of the pulse inter-digit pause. This allows the telephone company to have enough
time to accept the dialed digits correctly.
Default
830 ms
Value Range
630 ms, 830 ms, 1030 ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Low Speed Pulse Dial—Pulse % Break
Specifies the % break for a low speed pulse dial. This is the ratio between the break (on-hook) signal
and make (off-hook) signal in a pulse dial.
Default
60 %
Value Range
Other, 60 %, 67 %
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property