41
Basic Operation
•
If a pause is required for dialling,
(REDIAL/PAUSE)
can be stored in a
phone number counting as one digit (p. 62) in step 5.
•
You can exit the programming mode any time by pressing
(EXIT/CH)
.
•
If the display shows “
Memory is full
” in step 2, the display will return
to step 1. Press
(EXIT/CH)
, and erase other stored items from the
directory (p. 47).
1
Press
(FUNCTION/EDIT)
on the portable unit.
2
While the arrow points to “
Save
directory
”, press
OK
(
Yes
key).
•
The display shows the number of stored
items in the directory.
3
Enter a name, up to 15 characters, with the
dialling buttons,
(*)
(
←
) or
(#)
(
→
).
•
See the steps for entering names and
symbols (p. 42).
•
If a name is not required, press
OK
(
Next
key) and go to step 5.
4
Press
OK
(
Next
key).
5
Enter a phone number up to 22 digits.
•
Each time you press
the digit to the
left of the cursor is erased.
6
Press
OK
(
Save
key).
•
A beep sounds.
•
The display will return to step 1. You can
continue storing other items after pressing
OK
(
Yes
key).
•
To return to the standby mode, press
(EXIT/CH)
.
0987654321
H
OK=Save
Enter name
Tom Jones
#=
←→
H
OK=Next
Enter name
#=
←→
H
OK=Next
Directory=
0 item
Enter phone no.
Tom Jones
0987654321
H
Save directory
Ringer volume
GF
H
OK=Yes
