26
Handset Settings
Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted while the
key lock is on. The key lock is cancelled if the handset is turned off.
When the key lock is on, emergency calls cannot be made until key lock is
cancelled.
Key Lock On
Key Lock Off
•
is displayed and all dialling buttons are locked.
Recall Feature
RECALL
is used to access special telephone services. Contact your Network provider
for details. If your unit is connected to a PBX, pressing
RECALL
allows you to access
some features of your host PBX such as transferring an extension call.
•
Users in Australia can access Telstra’s “EASY CALL” service by having the recall time
set at 100 msec (this is the factory default setting), and then follow Telstra’s “EASY
CALL” instructions to operate this service.
Dialling Pause (for PBX line/long distance service
users)
A dialling pause is used when a pause in the dialling of the phone number is necessary
using a PBX or accessing a long distance service.
For example, when 0 (line access number) is dialled followed by a pause to access an
outside line through a PBX:
•
Entering a pause prevents misdialling when you redial or dial a stored number.
•
Pressing
PAUSE
once creates one pause. To extend the pause requirement time,
press
PAUSE
accordingly.
*1
is displayed on the LCD.
Press
OK
for more
than 2 seconds.
Press
OK
for more
than 2 seconds.
Press
PAUSE
.*1
Phone Number
Press
TALK
.
0
1
2
3
4
TCD410AL_e.book Page 26 Thursday, July 10, 2003 7:53 PM
