31
Answering System Features (KX-TCD445 only)
3
Press
{#}
.
4
Press
{
2
}
.
5
Select the desired setting by pressing
{
2
}
to
{
7
}
for 2 to 7 rings or
{
0
}
for “
AUTO
”.
6
Press
{>}
, then press
{ih}
.
Selecting the caller’s recording
time
You can change the maximum message
recording time allotted to each caller, or set
the unit to greet callers but not record
messages.
“
1 MINUTE
”: Caller messages are limited to
1 minute.
“
UNLIMITED
”: Caller messages are limited
only by the amount of total recording time
available in the answering system.
“
GREET ONLY
”: The unit plays the greeting
message but does not record caller
messages.
1
Press
{j}
.
2
Press
{v}
repeatedly to display
“
SETTING BS
”, then press
{>}
.
3
Press
{#}
.
4
Press
{
3
}
.
5
Select the desired setting by pressing
{
1
}
for “
1 MINUTE
”,
{
2
}
for “
UNLIMITED
” or
{
3
}
for “
GREET ONLY
”.
6
Press
{>}
, then press
{ih}
.
Note:
L
When the recording time is set to “
GREET
ONLY
”, the following will be displayed.
Turning the recording quality on/
off
The unit can record messages in either high
or normal quality mode. In normal quality
mode, the total recording time is
approximately 20 minutes.
In high quality mode, recording quality is
improved, but the total recording time is
reduced to approximately 10 minutes.
1
Press
{j}
.
2
Press
{v}
repeatedly to display
“
SETTING BS
”, then press
{>}
.
3
Press
{#}
.
4
Press
{
8
}
.
5
Select the desired setting by pressing
{
1
}
for “
ON
” (high) or
{
2
}
for “
OFF
” (normal).
6
Press
{>}
, then press
{ih}
.
Turning the monitor on/off
You can select whether the greeting
message and the caller message are heard
through the unit’s receiver and speaker
when the unit answers a call.
1
Press
{j}
.
2
Press
{v}
repeatedly to display
“
SETTING BS
”, then press
{>}
.
3
Press
{#}
.
4
Press
{
4
}
.
5
Press
{
1
}
to turn off or
{
2
}
to turn on.
6
Press
{>}
, then press
{ih}
.
Note:
L
When the monitor is turned on, you can
turn off only the speaker volume by
pressing
{v}
for 1 second.
TCD440̲445AL(E).book Page 31 Monday, May 24, 2004 1:17 PM
