54
Before Requesting Help
Problem
You cannot program function items such
as the talk mode display.
You cannot store a phone number in
memory.
While programming function items or
storing numbers, the unit starts to ring.
The unit does not display the caller’s
phone numbers.
does not function.
You cannot redial.
The paged handset does not answer.
While using the intercom, two tones
sound.
The unit misdials when connected to a
PBX.
Remedy
•
Programming is not possible while the unit is in the
talk or intercom or speakerphone mode.
•
Do not pause for over 60 seconds while
programming.
•
You cannot store a phone number while the unit is in
the talk or intercom mode.
•
Do not pause for over 60 seconds while storing.
•
To answer the call, lift the handset or press
/
. Start again from
the beginning after hanging up.
•
Other telephone equipment may be interfering with
your phone. Disconnect them and. try again.
•
Other electrical appliances connected to the same
outlet may be interfering with the Caller ID
information. Telephone line noise may be affecting
the Caller ID information.
•
The handFset is too far from the base unit.
•
The handset is engaged in an outside call. Wait until
the in use indicator (
) light goes out.
•
If the last number dialled was more than 24 digits
long, the number will not be redialled.
•
The handset is not in the same radio area.
•
The handset is engaged in an outside call.
•
The handset has been cancelled or has not been
registered. Register the handset in the base unit
(p. 41).
•
A call is being received. To answer, press
twice or
and
.
•
Check the pause function (p. 29).
DIGITAL SP-PHONE
DIGITAL SP-PHONE
KX-TCD953EB(046~056) 4.25.2000 1:56 PM Page 54
