manualshive.com logo in svg

Panasonic KX-TD1232CE, Installation Manual

The Panasonic KX-TD1232CE User Manual Addendum is an essential resource for users of this advanced communication system. With clear instructions and helpful illustrations, this manual provides in-depth guidance on product installation, configuration, and troubleshooting. Download this manual for free from 88.208.23.73:8080, enhancing your experience with the Panasonic KX-TD1232CE.

Share
Download
background image

2

Table of Contents

Additions to KX-TD816/1232 

Section 1, System Outline

1.4 Options

E&M (TIE) Line Unit ................................................................................................................................. 4

Section 2, Installation

2.4 Installation of Optional Cards and Units

E&M (TIE) Line Unit Connection .............................................................................................................. 5

Installing Expansion Unit (KX-TD184)..................................................................................................... 6

Section 3, Features

Automatic Configuration ............................................................................................................................10
E&M (TIE) Line Service ............................................................................................................................11
Live Call Screening (LCS)..........................................................................................................................20
Log-In / Log-Out ........................................................................................................................................22
Phantom Extension......................................................................................................................................23
Two-Way Recording into the Voice Mail...................................................................................................24
Uniform Call Distribution (UCD)...............................................................................................................24
Voice Mail Integration for Digital Proprietary Telephones ........................................................................28

Section 4, System Programming

[117]  Voice Mail Number Assignment......................................................................................................29
[118]  Voice Mail Extension Number Assignment.....................................................................................31
[119]  Voice Mail Extension Group Assignment........................................................................................33
[126]  UCD Overflow .................................................................................................................................34
[127]  UCD Time Table ..............................................................................................................................35
[128]  PBX Code.........................................................................................................................................36
[129]  E&M Signal Assignment..................................................................................................................37
[130]  Phantom Extension Number Assignment.........................................................................................38
[131]  ISDN DDI Number / Phantom Extension Number Transformation ................................................39
[220]  TIE First / Inter Digit Time ..............................................................................................................40
[340]  TIE Line Routing Table....................................................................................................................41
[341]  TIE Modify Removed Digit / Added Dial........................................................................................42
[431]  TIE Table Number Assignment........................................................................................................43
[432]  TIE Incoming Assignment ...............................................................................................................44
[433]  TIE Outgoing Assignment................................................................................................................45
[434]  TIE Subscriber Number Removed Digit ..........................................................................................46
[435]  TIE Added Number ..........................................................................................................................47
[436]  TIE Wink Time Out Assignment .....................................................................................................48
[437]  CO-to-TIE Transfer ..........................................................................................................................49
[438]  TIE-to-CO Transfer ..........................................................................................................................50
[439]  TIE-to-TIE Transfer .........................................................................................................................51
[440]  TIE Security Type ............................................................................................................................52
[441]  Line Hunting Sequence ....................................................................................................................53
[442]  Voice Path Type ...............................................................................................................................54
[443]  Voice Level (Transmit) ....................................................................................................................55
[444]  Voice Level (Receive) ......................................................................................................................56
[445]  TIE Receive Dial ..............................................................................................................................57
[616]  Live Call Screening Recording Mode Assignment ..........................................................................58

Changes

Section 3, Features

Station Message Detail Recording (SMDR) ...............................................................................................60, 61

Section 4, System Programming

[005]  Flexible CO Button Assignment ......................................................................................................60, 65
[100]  Flexible Numbering..........................................................................................................................60, 66
[106]  Station Hunting Type .......................................................................................................................60, 67
[109]  Expansion Unit Type ........................................................................................................................60, 69
[611]  ISDN DDI Number / Floating Number Transformation ..................................................................60
[811]  DISA / TIE User Codes ....................................................................................................................60, 71
[813]  Floating Number Assignment...........................................................................................................60, 72
[990]  System Additional Information, Fields (39) through (41)................................................................60, 74

Programming Tables for Added and Changed Features

...............................................77

Summary of Contents for KX-TD1232CE



























































































Reviews:

No comments

Related manuals for KX-TD1232CE

Planet IPX-1980 User Manual preview
IPX-1980
Brand: Planet Pages: 88
Quadro Quadro2x Installation Manual preview
Quadro2x
Brand: Quadro Pages: 57
Xorcom CompletePBX CXE2000 Getting Started Manual preview
CompletePBX CXE2000
Brand: Xorcom Pages: 2

Brands by name

Popular brands

Load more brands