5.3
Extension Programming
344
DECT Programming
17.
Press the Auto/OK button.
Display example:
18.
If you select "ENABLE" in step 16, enter a System Lock password.
19.
Press the Auto/OK button.
20.
Enter the System Lock password again.
21.
Press the Auto/OK button.
22.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
23.
Repeat steps 4 through 21.
24.
Press END.
Conditions
•
It is possible to search the display by pressing # (Next) or (Previous) in steps 8 and 10.
•
You can assign an extension number to each PS also in programme [671]
•
The PS password can be assigned in programme [672]
•
One PS must have only one registration number. It is not possible to assign the different
registration number for one PS.
•
If the PS extension number or the PS password is changed after registering, the PS cannot
be used until it is registered again in this programme.
•
Do not press END after step 15, or it may not registered correctly.
(if disabled): UNLOCKED
(if enabled): ENTER PASSWORD
=
Display:
ENTER PASSWORD
=
****
Display:
REENTER PASSWORD
=
Display:
REENTER PASSWORD
=
****
Display:
LOCKED
(With a display PT)
Summary of Contents for KX-TD1232JT
