2.9
Optional Programming
General Programming
215
06
1
Sets the time after terminating the
OGM.
0 : 0 s
1 : 5 s
1
•
DISA
•
OGM
2
Determines whether the account code is
printed out or not (shown in dots) by the
SMDR.
0 : shown in dots
1 : shown
1
SMDR
3-5
Reserved
6
Selects the result when an outside call is
routed by Call Forwarding to a voice
mail port which is in the AA service
mode. [For both Inband and DPT
Integration]
disable: AA service mode
enable: The mode will change to the
VM service mode and a
Follow On ID is sent.
When the voice mail port is in the VM
service mode, this programme will not
be affected.
0 : disable
1 : enable
1
Voice Mail
Integration
7
Selects the result when an outside call is
routed to a voice mail port by IRNA [For
both Inband and DPT Integration].
When the voice mail port is in the VM
service mode;
enable: VM service mode
disable: The mode will change to the
AA service mode [Only when
Inband].
When the voice mail port is in the AA
service mode;
enable: The mode will change to the
VM service mode and a
Follow On ID is sent.
disable: AA service mode
0 : enable
1 : disable
1
Voice Mail
Integration
Explanation
Area
Bit
Description
Selection
Default
Feature Guide
References
Summary of Contents for KX-TD1232JT
