5.3
Extension Programming
DECT Programming
353
[657]
PS Class of Service
Description
Programmes each PS a Class of Service (COS). The COS determines the call handling abilities
for each PS. Primary and secondary COS numbers can be assigned for each PS.
Selection
•
PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
•
COS number: 1 through 8
Default
All PSs – Primary, Secondary – COS 1, COS 1
Programming
1.
Enter 657.
Display: PS COS Assign
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:COS1, COS1
4.
Enter a primary COS number.
To change the current entry, enter the new number.
5.
Press .
6.
Enter a secondary COS number.
To change the current entry, enter the new number.
7.
Press STORE.
8.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration number.
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
•
There is a maximum of eight Classes of Service. Every PS must be assigned to a Class of
Service and is subject to COS Programming in programmes [5XX] and [991].
Summary of Contents for KX-TD1232JT
