5-34
Standard Telephone Features
C
5.2
Standard Telephone Features
Call Transfer — to Outside Line
Allows you to transfer the call you received to an external party.
During a conversation;
1. Flash the hookswitch.
• The other party is placed on hold.
• You hear a confirmation tone and then a dial tone.
2. Dial the line access code (9 or 81 through 83).
3. Dial the phone number where the call will be transferred.
4. Wait for an answer and announce.
5. Hang up.
• The call is transferred.
Conditions
• If you want to return to the held call, flash the hookswitch.
• Execution of this feature is determined by the “Class of Service” assigned to the extension.
• If a call between two external parties is established, an alarm tone is sent to both parties
fifteen seconds before the assigned duration time limit (default: 10 min.). “Hold
Recall” is generated to the transferring extension fifty seconds before the time out.
Programming References
• System Programming — Installation Manual
[206] Outside-to-Outside Line Call Duration Time
[503] Call Transfer to Outside Line
[601] Class of Service
Feature References
Hold Recall (
→
see Installation Manual)
2
3
line access code
1
4
phone number
5
