Panasonic KX-TD500 User Manual Download

Page: 164 / 554

Station Features and Operation (PT/SLT)

164

User Manual

Alternating (to Ring-Calling mode)

Conditions

•

Mode Selection

You can select either to be ring-signaled or voice-signaled by Station Programming.
The default is Ring-Calling mode.

•

Any extension (PT, SLT) user can use this feature during an intercom call if the other party
is a PT extension.

•

If the party you are calling is using a Single Line Telephone (SLT), only Ring-Calling mode
is available.

•

One time switching

You can switch the desired calling mode only once during a call.

•

Voice-signaling is not available in the following cases:

— if the other extension is an SLT.
— if the other extension is busy on another call.
— if another call is ringing on the other extension.

7230 / 7235 / 7433 / 7436

Tone

If the extension you are calling is in Voice-Calling mode, you hear a
confirmation tone.

Press

Tone (S2).

Ringback tone

•

Ring-Calling mode is established.

PT and SLT

If the extension you are calling is in Voice-Calling mode, you hear a confirmation tone.

Ringback tone

Ring-Calling mode is established.

Dial .

•

Summary of Contents for KX-TD500











































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands

Panasonic KX-TD500, User Manual

Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands