Station Features and Operation (PT/SLT)
184
User Manual
•
Co-to-CO Line Call
If a call between two outside parties is established by this feature, the call duration is
determined by System Programming <Section 2.5 System Timer, "CO-to-CO Line Call
Duration Time" in the Programming Guide>.
An alarm tone is sent to both outside parties 15 seconds before the time-out. The call is
disconnected at the time-out.
•
Trunk-to-Trunk Connection
Before utilizing this feature, "Trunk to Trunk Restriction" should be enabled by System
Programming.
•
You can store the telephone number up to 24 digits. Valid digits are "0 through 9," " " and
PAUSE. PAUSE can also be stored by dialing "
."
•
This feature does not apply to the unscreened transfer call.
Programming Guide References
•
2.3 Numbering Plan
– Call FWD - Do Not Disturb Set / Cancel
•
2.4 Class of Service (COS)
– Call FWD to CO / TIE
– Time Limit of Outside Calls
– Trunk Group Setting
– Call FWD Follow me
•
2.5 System Timer
– Call Forwarding - No Answer Time
– Extension-to-CO Line Call Duration Time
– CO-to-CO Line Call Duration Time
•
2.7 Trunk to Trunk Restriction
•
2.8 System Option
– Special dial tone after setting feature
– FWD / DND lamp pattern
•
4.3 Extension Line
– CO Key
– PF Key
– Call Forwarding - No Answer Time
•
4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.3 System Features
•
Limited Call Duration
Summary of Contents for KX-TD500
