Station Features and Operation (PT/SLT)
User Manual
239
Extending the call duration while calling a CO line
Re-try
Warning for the Direct Inward System Access Users
When you enable the CO-to-CO Line Call feature of
Direct Inward System Access (DISA)
function
, if a third party discovers the password (a DISA User Code) of the system, you have
a risk that they will make illegal phone calls using your telephone line, and the cost may be
charged to your account.
In order to avoid this problem, we strongly recommend the following points:
1: Carefully maintain the secrecy of the password.
2: Specify a complicated password as long and random as you can make it.
3: Change the password frequently.
From Outside Telephone
Dial any key except " "
after the warning tone.
When you make a call to any CO line using the DISA feature, the
line is disconnected after a pre-programmed time (default: 10 min)
any key except " "
From Outside Telephone
It is possible (by System Programming) to dial a different number during a conversation
with an outside party or while hearing a ringback, reorder, or busy tone.
Press .
desired no.
You hear a dial tone.
If you dial “
” while hearing a DISA outgoing message,
dial tone, or after the DISA outgoing message, the call
will be disconnected.
You must dial a line access code (9 or 801 through 848)
when calling an outside party.
Summary of Contents for KX-TD500
