Panasonic KX-TD500 User Manual Download

Page: 355 / 554

Station Features and Operation (PT/SLT)

User Manual

355

4.3.62

Pickup Dialing (Hot Line)

You can make a call to the pre-programmed party simply by going off-hook.

Programming the phone number

Setting / Canceling

Dialing

Conditions

•

This feature does not work if you go off-hook to answer an incoming call or retrieve a call
on hold.

•

This feature does not work if a message notification is left on your extension.

•

Up to 24 digits, consisting of "0 through 9" " " and P [Pause] can be stored. "#" cannot be
stored.

Confirmation
tone and
dial tone

Lift the handset or press
SP-PHONE/MONITOR.

Dial 742.

Enter the phone number.

phone no.

Dial #.

Hang up or press
SP-PHONE/MONITOR.

You must dial a line access code (9 or 801 through 848) as the
first digit when storing an outside phone number.

PT and SLT

Confirmation tone
and dial tone

Lift the handset or press
SP-PHONE/MONITOR.

Hang up or press
SP-PHONE/MONITOR.

To set: Dial 741.
To cancel: Dial 740.

To set

To cancel

PT and SLT

Lift the handset or press
SP-PHONE/MONITOR.

Wait for an answer.

Talk.

PT and SLT

Summary of Contents for KX-TD500











































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands

Panasonic KX-TD500, User Manual

Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands