Station Features and Operation (PT/SLT)
User Manual
381
•
If other extension user calls your extension when the alarm is sounding, he will hear a busy
tone. However, if your PT is DN type and there is an idle PDN button, the call comes in on
that PDN button.
In this case, the caller hears a ringback tone.
•
If you receive an incoming CO call during the alarm, the ringing starts after the alarm stops.
•
If you are having a conversation at the time the alarm is set to sound, the alarm starts after
the conversation.
•
Station Message Detail Recording (SMDR)
SMDR automatically records the detailed Timed Reminder information (data, time, tenant
no. extension number, start/answer/no answer). It is programmable by System
Programming to print out when the Timed Reminder starts and the alarm is answered or not
answered.
The print-out example is shown below.
•
Setting a new time clears the preset time.
•
Timed Reminder Ringing Time
The alarm tone continues to ring the destination extension for 30 seconds by default. This
period of time, ranging from 30 to 240 seconds, can be changed by System Programming
<Section 2.5 System Timer "Timed Reminder Ringing Time" in the Programming Guide>.
•
Timed Reminder Arrive Count
Timed Reminder ringing is repeated up to 3 times until the destination extension replies it
by default. This number of times ranging from 1 to 5 times, can be changed by System
Programming <Section 2.5 System Timer "Timed Reminder Arrive Count" in the
Programming Guide>.
•
Timed Reminder Arrive Wait Time
The interval time between each Timed Reminder ringing is 60 seconds by default. This
interval time ranging from 20 to 240 seconds, can be changed by System Programming
<Section 2.5 System Timer "Timed Reminder Arrive Wait Time" in the Programming
Guide>.
•
Hardware Requirements for a wake-up call
To utilize a wake-up call, DISA card (KX-T96191) is required.
•
OGM Recording
To utilize a wake-up call, set OGM Type of an OGM Group to "Wake-up." OGM Recording
can be done only by the Manager or an Operator.
•
What if a wake-up message is not recorded?
An alarm tone is heard instead of a wake-up message.
•
The number of extension users who can set this feature is not limited. However, the number
of extension users who can hear the wake-up message at a time is limited to a maximum of
56 per DISA card. If the 57th or later extension user goes off-hook to hear the wake-up
message, he will hear the alarm tone instead of the wake-up message.
Date
Time
Ext
CO
Dial Number
Acct code
CC
22/02/00
01:31PM
E1017
Timed Reminder / Start
22/02/00
01:31PM
E1017
T
1
1
Timed Reminder / No Answer
*********************************************************************************************
*********************************************************************************************
Ring Duration
22/02/00
01:31PM
E1017
1
Timed Reminder / Answer
Summary of Contents for KX-TD500
