Panasonic KX-TD500 User Manual Download

Page: 485 / 554

Station Features and Operation (PT/SLT)

User Manual

485

Features on the Ninth Display

On-hook.

Parameters

- Time: (hh:mm): hour (01 through 12)minute (00 through 59)
- AM/PM: 0 (for AM) / 1 (for PM)
- Daily alarm: 1 (for Yes) / 0 (for No)

Press the desired Function button
and enter the required parameters.

CLR

PROG

Time(hh:mm):07:00

AM/PM(0/1) :0

Daily Y/N(1/0) :0

To set, press PROG (S3) button.
To cancel, press CLR (S2) button.

CLR

PROG

Time(hh:mm):07:00

AM/PM(0/1) :0

Daily Y/N(1/0) :0

Timed Reminder

Sets or cancels the
alarm ringing time.

Ninth Display

NEXT

Remote DND (

→

ext)

Remote Timed Reminder

Station Lock (

→

abcabc)

Station Program Clear

Timed Reminder

See the next
page.

NEXT

Station
Program Clear

Clears the features
set at your
telephone.

On-hook.

Electronic
Station Lockout

Denies or allows
other people from
using your telephone.

Enter lock code
(000 through 999).

On-hook.

- twice: to deny
- once: to allow

Remote DND

(operator/manager only)

Refer to the
corresponding feature
in Section 4.4,
"Operator / Manager
Service Features."

Timed Reminder,
Remote
(Wake-Up Call)

(operator/manager only)

Refer to the
corresponding feature
in Section 4.4,
"Operator / Manager
Service Features."

Summary of Contents for KX-TD500











































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands

Panasonic KX-TD500, User Manual

Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands