Panasonic KX-TD500 User Manual Download

Page: 95 / 554

Station Programming

User Manual

2.2.13

Ringing Tone Selection for CO Buttons

Allows you to assign a ringer frequency to each CO (S-CO, G-CO, L-CO) or DN (PDN, SDN)
button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

— To exit the Station Programming mode: Press [PROGRAM].

Conditions

•

The default is Ringing Tone Type 2.

•

This feature applies to the following line access buttons:
S-CO, G-CO, L-CO, PDN, SDN

Press

CO, PDN

SDN

which you wish to
change the ringing tone.

Press

STORE

Press the same

CO,PDN

SDN

again.

Enter the tone type number
(1 through 8).

tone type no.

AUTO DIAL

STORE

The display shows the current
status.

The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.

<DPT Display Example>

(-x:tone type number)

If you want to change the tone type, enter another tone type
number.

Tone Type-X

DPT

The STORE indicator lights.
The display shows the initial
programming mode.

Summary of Contents for KX-TD500











































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands

Panasonic KX-TD500, User Manual

Search results

Summary of Contents for KX-TD500

Reviews:

Related manuals for KX-TD500

Brands by name

Popular brands