4.4
E1 Line Programming
E1 Programming
357
[741]
E1 Dial Mode
Description
Assigns a dial type to each E1 channel.
For DR2 channel, only the dial sending mode can be assigned in this programme. For dial
receiving mode, the assignment in programme [745]
E1 DR2 Receiver is activated.
For the other channels, the assignment in this programme is used for both the dial sending and
receiving mode.
This programme is available for the KX-TD1232 only.
Selection
•
E1 channel number: 01 through 30, ( =All E1 channels)
•
Signal type: Pulse-10 / Pulse-20 / DTMF-80 / DTMF-160 / MFC-R2
Default
All E1 channels – Pulse-10
Programming
1.
Enter 741.
Display: 741 E1 DIAL MODE
2.
Press NEXT.
Display: CH NO?
3.
Enter a channel number.
To enter a channel number 01, you can also press NEXT.
Display example: CH01:Pulse-10
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another channel, press NEXT or PREV, or SELECT and the desired
channel number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
•
Adjust to a setting of the connected telephone company.
•
To assign all channels to one selection, press the key in step 3. In this case, the display
shows the contents programmed for channel 01.
Summary of Contents for KX-TD816
