RS
3
Features
3-102
Features
R
inging Tone Selection for CO Buttons
Description
Allows the digital proprietary telephone user to select the desired
ringer frequency for each CO button. This provides discrimination
of incoming outside calls.
Conditions
There are eight ringer frequencies available. One of them can be assigned
to a CO button that is assigned as each of the following buttons: Single-
CO, Group-CO, or Loop-CO button. It is not possible to assign a ringer
frequency to any other button.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual,
Ringing Tone Selection for CO Buttons
Feature References
None
Operation References
Not applicable.
S
ecret Dialing
Description
Allows an extension user to conceal all or part of a registered
telephone number that normally appears on the display during
System Speed Dialing or One-Touch Dialing. Numbers can be
assigned to flexible buttons on DPT and DSS Console. When a
display telephone user makes a call to the telephone number that is
set to Secret Dialing, all or part of the number does not appear on
the display. Additionally, KX-T7235 model telephones are capable
of Secret Dialing for “Station Speed Dialing” numbers.
Conditions
• When storing a number, press the INTERCOM button at the beginning
and the end of the number to be concealed.
• You can conceal one or more parts of a telephone number.
• The concealed part will be printed out by SMDR.
Programming References
No programming required.
Feature References
Section 3, Features,
One-Touch Dialing
System Speed Dialing
Special Display Features for KX-T7235 – Station Speed Dialing