4.8
Extension Programming
Class of Service
(contd)
601
4-116
System Programming
Conditions
• There is a maximum of eight Classes of Services. Every extension
must be assigned to a Class of Service and is subject to the COS
Programming of programs [500] through [508] and [991].
• A secondary COS number can be assigned per extension only for
Check-In / Check-Out feature. To program other extensions, you
need only to enter a primary number.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
Jack numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks to one COS, press the
key at step 3. In this
case, the display shows the contents programmed for Jack 01.
Feature References
Section 3, Features,
Class of Service (COS)