2-8
Installation
2.2.4
Wall Mounting
Mounting on Wooden Wall
Templet
3. Hook the main unit on the screw heads.
1. Place the templet (included) on the wall
to mark the four screw positions.
2. Install the four screws (included) into the
wall.
Drive the screw
to this position
Wooden
Wall
Mounting on Concrete or Mortar
Wall
2. Drill four holes and drive the anchor
plugs (included) with a hammer, flush to
the wall.
1. Place the templet (included) on the wall
to mark the four screw positions.
3. Install the four screws (included) into the
anchor plugs.
Drive the screw
to this position
4. Hook the main unit on the screw heads.
KX-TD1232
Concrete Wall
To the wall surface
Anchor Plug
29 mm
(1 1/8 inch)
6.4 mm
(1/4 inch)