5-8
SLT Features
A
5.2
SLT Features
Account Code Entry
An Account Code is used to identify incoming and outgoing CO calls for accounting and
billing purposes. The account code is appended to the "Station Message Detail Recording
(SMDR)" call record. For incoming CO calls, account codes are not required. For outgoing
CO calls, account codes are often required. You can enter account codes in the following
three modes: Verified - All Calls mode, Verified - Toll Restriction Override mode, and
Option mode. One mode is selected for each extension on a "Class of Service
*
1
" basis.
Entering account codes
1. Lift the handset.
2. Dial the feature number (49).
• No tone is returned.
3. Dial the account code and #.
• You may dial 99 instead of "#."
• You hear confirmation tone and then dial tone.
4. Dial the line access code (9 or 81 through 88) and dial.
Conditions
In "Verified - All Calls" mode
• You must always enter a pre-assigned account code when making any of the following calls
unless it has previously been stored in memory:
a) Call Forwarding — to CO Line
b) Manual Dialing (Selecting a CO line)
c) Pickup Dialing (Hot Line)
d) Redial, Last Number
e) Station Speed Dialing
f) System Speed Dialing
In "Verified - Toll Restriction Override" mode
• You can enter a pre-assigned account code only when you need to override toll
restriction (Toll Restriction Override by Account Code Entry).
1
3
account code and #
2
4
line access code
With
Compliments
Absolute
Phone
&
Data
