Panasonic KX-TD816AL User Manual Download

Page: 247 / 328

SLT Features

5-39

5.2

SLT Features

Electronic Station Lockout

Allows you to lock your extension so that other users cannot make outgoing CO calls from
your extension.

Locking

1. Lift the handset.

2. Dial the feature number (77).

3. Dial the lock code (000 through 999).

4. Dial the same lock code again.

• You hear confirmation tone and then dial tone.

5. Hang up.

Unlocking

1. Lift the handset.

2. Dial the feature number (77).

3. Dial the same lock code as you used to lock the extension.

• You hear confirmation tone and then dial tone.

4. Hang up.

lock code

With

Compliments

Absolute

Phone

Data

Summary of Contents for KX-TD816AL









































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, User Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands