2.2
Programming
2-8
Station Programming
1
8
2
ID code
4
extension number
5
6
1
3
HOLD
Extension Charge Fee Reference
Provides you with the display of each extension charge (telephone rate). You can refer and
clear the displayed meter and charge.
— Be sure that you are in Station Programming mode : Press [PROGRAM] [9] [9].
1. Dial 8.
2. Enter the ID code (4 digits).
• The display shows:
Charge Meter
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 1.
4. Dial the extension number or press the NEXT (S3) button until the
extension number is designated.
• The display shows the meter.
<Example> If you assign the extension number 201;
201:00005
SEL CLR NEXT
5. Press the SEL (S1) button.
• The display shows the charge.
<Example>
201:$00001.5
SEL CLR NEXT
• Pressing each button corresponds to the following operations:
— CLR (S2) + STORE button : To clear the meter and charge
of the displayed extension
number.
— NEXT (S3) button : To advance to the extension number that
is assigned at the next jack number.
— REDIAL (PREV) button : To return to step 4.
6. Press the HOLD (END) button.
• The display shows the initial programming mode.
— To exit from Station Programming mode : Press [PROGRAM] or lift the handset.
SEL
S1
S2
S3
With
Compliments
Absolute
Phone
&
Data
