2.2
Programming
Station Programming
2-21
1
2
2
4
AUTO DIAL
STORE
3
desired number
One-Touch Dialing Button
(Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a One-Touch Dialing button.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
1. Press the desired Flexible (CO, DSS, PF) button which you wish to
assign as a One-Touch Dialing button.
2. Dial 2.
• The display shows:
CLR
3. Enter the desired number (an extension number or a phone
number, etc.).
• Up to 16 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
— To exit from Station Programming mode : Press [PROGRAM] or lift the handset.
Conditions
• The number can be an extension number, a telephone number, or a feature number. Up to
sixteen digits can be stored on a One-Touch Dialing button.
• To store the telephone number of an outside party, the line access code (9, or 81 through
88) must be stored as the leading digit.
• You can store a number consisting of seventeen digits or more by dividing it and assigning
it in two One-Touch Dialing buttons. In this case, the line access code should not be stored
on the second button.
• You can use 0 through 9,
, #, PAUSE, RECALL, CONF, and INTERCOM for storing:
#
: change the dialing mode (Pulse to Tone)
RECALL : Register Recall Signal
PAUSE
: pause
CONF
: — (hyphen)
INTERCOM : for secret dialing
With
Compliments
Absolute
Phone
&
Data
