24
4.3
System Programming
Charge Display Selection
120
Description
Assigns the initial display format of charge fee on a display
telephone.
Selection
in Meter / in Charge
Default
in Meter
Programming
1.
Enter 120.
Display: Charge Meter
2.
Press NEXT.
Display example: in Meter
3.
Keep pressing SELECT until the desired selection is
displayed.
4.
Press STORE.
5.
Press END.
Conditions
• This programming is only effective when you select for charge (SMDR
Output) by Program [815] “SMDR Output Mode.”
• This programming will also determine the print-out format of the
charge fee reference.
Feature References
Section 3, Features,
Charge Fee Reference
Display, Call Information
Station Message Detail Recording (SMDR)
