Panasonic KX-TD816E Installation Manual Download

Page: 526 / 600

8.2.2

Site Planning

8-6

DECT Portable Station Section

The Relationship between Radio Waves and
Building Structure and Materials

• The transmitting range is affected more by the building materials

and thickness of the material than the number of obstacles.

• Radio waves tend to be reflected or diffracted by conductive

objects and rarely penetrate them.

• Radio waves tend to penetrate insulated objects and are rarely

reflected by them.

• Radio waves penetrate thin objects more than thick objects.
• The table below shows the transmission tendency of radio waves

when they reach objects made from various materials.

Wall

Window

Floor

Partition

Column

Cabinet

Concrete

Ferroconcrete

Glass

Glass with wire nets

Glass covered with
heat-resistant film

Ferroconcrete

Steel

Plywood, Glass

Ferroconcrete

Metal

Steel

Wood

The thicker they are, the less radio waves penetrate them.

Radio waves can penetrate them, but the more iron there is,
the more radio waves are reflected.

Radio waves usually penetrate them.

Radio waves can penetrate them, but tend to be reflected.

Radio waves are weakened considerably when they penetrate
windows.

Radio waves can penetrate them, but the more iron there is,
the more radio waves are reflected.

Radio waves are reflected and rarely penetrate them.

Radio waves usually penetrate them.

Radio waves can penetrate them, but the more iron there is,
the more radio waves tend to be reflected or diffracted.

Radio waves tend to be reflected or diffracted.

Radio waves are usually reflected or diffracted, and rarely
penetrate them.

Radio waves can penetrate them, but they are weakened.

BJECT

ATERIAL

RANSMISSION

ENDENCY

Summary of Contents for KX-TD816E

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD816E

Reviews:

Related manuals for KX-TD816E

Brands by name

Popular brands

Panasonic KX-TD816E, Installation Manual

Search results

Summary of Contents for KX-TD816E

Reviews:

Related manuals for KX-TD816E

Brands by name

Popular brands