7.2. PSU-M (KX-TDA0104XJ/X)
1. Remove the seven screws (A) ( 3 × 6 mm).
2. Remove the screw (G) ( 3 × 4 mm).
Caution:
When putting the screw again, use the screw (G).
3. Remove the three screws (B).
4. Pull out the three connectors.
5. Remove the angle.
6. Separate the chassis body and chassis cover.
1. Remove the seven screws (F).
2. Remove the screw (E).
3. Remove the sub board 3.
1. Remove the eight screws (F).
2. Remove the main board.
12
KX-TDA0103XJ / KX-TDA0104XJ / KX-TDA0108XJ / KX-TDA0103X / KX-TDA0104X / KX-TDA0108X
Summary of Contents for KX-TDA0103X
Page 133: ...MEMO 133 KX TDA0103XJ KX TDA0104XJ KX TDA0108XJ KX TDA0103X KX TDA0104X KX TDA0108X ...
Page 141: ...MEMO 141 KX TDA0103XJ KX TDA0104XJ KX TDA0108XJ KX TDA0103X KX TDA0104X KX TDA0108X ...
Page 145: ...memo 145 KX TDA0103XJ KX TDA0104XJ KX TDA0108XJ KX TDA0103X KX TDA0104X KX TDA0108X ...
Page 151: ...MEMO 151 KX TDA0103XJ KX TDA0104XJ KX TDA0108XJ KX TDA0103X KX TDA0104X KX TDA0108X ...