Logical Installation
Installation Manual
59
4.7
Create New Units
Once a new Group has been created, new units can be added to the group; Gateways
*1
and
Gatekeepers
*2
and Other Unit
*3
. The Maintenance Console Software Unit Information Setup
Wizard is used to create both types of units in exactly the same manner.
A new unit is shipped with the factory default IP addressing information (i.e., 192.168.1.200).
Although this information can be used to establish a LAN type connection, it is usually easier
to first reconfigure the unit's IP addressing information to match that of the existing LAN, using
a direct RS-232C serial cable connection.
The Maintenance Console Software's Unit Information Setup Wizard method for doing this is
discussed in the following procedures.
If desired, once a unit has been created using this direct method, the unit setup information can
be edited remotely, using a network connection.
*1
A Gateway is the KX-TDA0480 IP Gateway card.
*2
A Gatekeeper is an H.323 device that is used to manage H.323 Voice-Over-IP networks. Only H.323 networks use a Gatekeeper.
the IP Gateway networks may also be configured using internal DNS server management capabilities.
*3
An Other Unit refers to Other Device excluding Gateway and Gatekeeper.
Summary of Contents for KX-TDA0480
