Logical Installation
60
Installation Manual
4.7.1
RS232C Port Configuration
In section 3.3 the RS233C cable was connected with the terminal to be used for initialising the
KX-TDA0480. The Maintenance Console Software is configured by default to use the port
Com 1 for serial data transfer. If a serial communications port other than Com 1 is being used
on the computer terminal used for unit initialisation, the MCS Options item must be selected
from the Tools menu to reconfigure the Com port.
To reconfigure the serial communications port:
1.
Select
Options
from the MCS
Tools
menu.
The MCS displays the Options folders
2.
In the first folder (General), use the
Select RS-232C port
pull-down list-box to choose the
desired port.
Summary of Contents for KX-TDA0480
