2.2 Programming
12
Programming Guide
HTTP Settings
QSIG Connectionless Tunneling Settings
Others
Parameter & Description
Default
Value Range
#
HTTP Port No.
Specifies the port number for HTTP communications by the
card.
Generally, there is no need to change the default value.
80
1 to 65535
Parameter & Description
Default
Value Range
#
QSIG Connectionless Tunneling Port No.
Specifies the port number for connectionless tunneling
between cards at different locations in a QSIG network.
Generally, there is no need to change the default value.
Notes
•
Connectionless tunneling enables the PBXs on a
QSIG network to use enhanced networking
features. (For more information about these
features, refer to the relevant sections of the Hybrid
IP-PBX documentation.)
•
If you are using a gatekeeper, and enhanced
networking features of the PBX are being used,
overall performance of the card may deteriorate
when network traffic is heavy.
•
If you are using a gatekeeper, and "
Routed
" is
(see "2.2.2 H.323 Parameters"), connectionless
tunneling is not possible. In this case, the PBX
cannot use the enhanced networking features.
1718
1 to 65535
Parameter & Description
Default
Value Range
Host Name
This parameter is provided for engineer use only.
VoIP + lower 3
bytes of the MAC
address
Max. 255 characters
#
LAN Disconnect Threshold Time (s)
Specifies the time (in seconds) until disconnection from the
LAN is recognized.
For example, even if a LAN cable is disconnected during a
call, reconnecting the cable within this time period maintains
the call.
5
1 to 10
