2.2 Programming
10
Programming Guide
2.2
Programming
2.2.1
Network Parameters
1.
Click
1.1 Network Settings, General
in the main menu.
Current IP Address
,
Current Subnet Mask
, and
Current Default Gateway
show the current
IP address settings of the VoIP Gateway Card.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
•
Click
ALL CLEAR
to return all parameters to their previous values.
•
Click
MENU
to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Click
LOGOUT
to log out from the IP-GW16 Maintenance Utility (see "2.5.2 Log Out").
3.
Click
OK
.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will be prompted to correct your input. Enter
correct values for the parameters shown in red and try again.
4.
Confirm your entry and click
OK
.
To return to the previous screen, click
CANCEL
.
