PBX setting:
Make sure you have the IP addresses for both the IPCMPR and VoIP-DSP in sequence and in the same IP
range on the IP network. For example, if the private IP network is 192.168.0.0/24, then set the IPCMPR for
192.168.0.101, the VoIP-DSP for 192.168.0.102, Subnet mask 255.255.255.0 and the default gateway address
is 192.168.0.1.
(*Note: You can assign public IP address scheme on both IPCMPR and VoIP-DSP as well, check with your
provider for details.)
KX-NCP Screenshot:
From the System Menu, click on Configuration / Slot (1.1). Hover your mouse pointer onto the IPCMPR card
and select Card Property. From the LAN Setting tab, here is where you want to set the IP address scheme for
the PBX to communicate over the IP network.
Pg. 3
Please Continue to Next Page
