2.7 [1] Configuration
112
PC Programming Manual
Feature Manual References
None
High Speed Pulse Dial—Pulse % Break
Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook) signal
and make (off-hook) signal in a pulse dial.
Default
60 %
Value Range
Other, 60 %, 67 %
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Manual References
None
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial.
High Speed Pulse
Dial—Pulse % Break
on this screen determines the value that can be specified here.
Default
32 ms
Value Range
4 × n (n=4–18) ms
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Manual References
None
High Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a high speed pulse dial.
High Speed Pulse Dial—
Pulse % Break
on this screen determines the value that can be specified here.
